Filter
Top Products
DIMENSIONS
• Dual-voltage input
120/277VAC, 60Hz
• Die cast aluminum housing
with hinged faceplate and
die-cast canopy for ceiling
or end mounting
• AC incandescent: two 20W
T6 1/2 intermediate base
lamps
• AC fluorescent: two 5W
F5TT compact fluorescent
lamps
• Lead Calcium or Premium
Nickel Cadmium battery
• Universal pattern
knockouts on rear of single
face housing for direct
mounting to junction box
• NFPA 101 compliant
knockout chevrons allow
quick conversion to
directional signs
• Stencil and open face
signs available
• Downlight diffuser
• Line-latching, Solid-State
voltage limited charger,
Solid-State switching,
low-voltage disconnect,
brownout circuit,
overload/short-circuit
protection, test
switch/power indicator
light
• UL 924 Listed, Life Safety
NFPA 101, CSA Certified,
NEC/OSHA, UL FTBR
Listed, most state and
local codes
DESCRIPTION
The Sure-Lites Pinnacle Family
of Surface Mounted Die Cast
Aluminum Exits combine
strength, durability and
aesthetics. The pleasing lines
and the range of architecturally
compatible finishes will add a
new dimension to any design.
8 1/4" (210mm)
2 5/8" (67mm)
(146mm)
5 3/4"
2 1/4"
(57mm)
8 1/4"
(210mm)
13 5/8" (346mm)
Family
CAX=Die Cast Aluminum
Exit Surface Mount
Series
3=Self-Powered, Incandescent
5=Self-Powered, Fluorescent
Face Options
1=Single
2=Double
Battery
00=Lead Calcium
70=Nickel Cadmium
Factory Options
00=No Options
20=DC Flasher
(1)
30=DC Flasher/ Buzzer
(1)
65=Tamperproof Screws
85=Vandal Shield
90=DC Only Fire Alarm
(1)
Interface
Letter Colors
R=Red
G=Green
RWO=Red on White
(2)
GWO=Green on White
(2)
WRO=White on Red
(2)
WGO=White on Green
(2)
O=Open Face
(2)
ORDERING INFORMATION-INCANDESCENT, FLUORESCENT EXITS
SAMPLE NUMBER: CAX310085R
(1)
DC Flasher, DC Flasher/Buzzer and DC Fire Alarm Interface options available with Incandescent exits only.
(2)
RWO, GWO, WRO, and WGO
are open face styles with “Exit” legend. Use “O” option for ordering special wording-lenses ordered separately (consult Cooper Lighting
Representative).
Wattage Ratings
Lead Calcium Battery=10.8W for 1 1/2 hrs., 7.2W for 2 hrs. Nickel Cadmium Battery=15.0W for 1 1/2 hrs.
Energy Data
Charge Mode (Fully Discharged Battery): Sealed Lead Calcium Battery
Input Power: Input Current (Max.): Power Factor: T.H.D.:
120V 277V 120V 277V 120V 277V 120V 277V
Incandescent Exits-20W Lamps 53W 51W .45A .19A >.99 >.98 <9% <10%
Fluorescent Exits-5W Lamps 29W 30W .40A .16A >.61 >.66 <12% <11%
Standby Mode (Fully Charged Battery) Sealed Lead Calcium Battery Input Power consumption is reduced by approximately 12 Watts in the
standby operating mode
Sealed Nickel Cadmium Battery
Incandescent Exits-20W Lamps 45W 43W .38A .16A >.99 >.99 <7% <7%
Fluorescent Exits - 5W Lamps 20W 21W .36A .15A >.48 >.52 <15% <14%
Housing Finishes
Blank=Brushed Aluminum
Face with Black Housing
W=White
B=Black
BZ=Bronze
Voltage
Blank=120V/277V
Factory Options
SD=Self-Diagnostic
(Incandescent Only)
Accessories (Order Separately)
Screwdrivers
059012SP=Tamperproof
Screwdriver Bit
VRSD=Vandal Resistant
Screwdriver
Wire Guard
WG1=Surface, Wire Guard
WGS11=Ceiling, End Wire
Guard
VS1=Polycarbonate Vandal
Shield
Pendant Kits
CAX18PK=Pendant Kit, white
CAX18PKHT=”Hang-true”
Pendant Kit, white
CAX SERIES
Die Cast
Self-Powered
Incandescent, Compact
Fluorescent Lamping
EXIT LIGHTING
637
EXIT SIGNS Architectural
COOPER LIGHTING
COOPER LIGHTING - SURE-LITES
®
CAX