Filter
Top Products
AABBPP BBEELLTT DDRRIIVVEE PPAANNEELL FFAANNSS
1. Motor side guard
2. Mounting boot
3. Gravity shutter
1
2
3
AACCCCEESSSSOORRIIEESS // OOPPTTIIOONNSS
PPRROODDUUCCTT SSPPEECCIIFFIICCAATTIIOONN GGUUIIDDEE
11..00 GGEENNEERRAALL
A. Fans shall be model ABP Belt Drive Panel Fans, as manufactured by Continental Fan Manufacturing Inc.,
of Buffalo, NY, and of the size, capacity and flow direction as indicated on the drawings and fan schedule.
B. Fans shall be rated and tested in accordance with ANSI/AMCA Standard 210-99.
C. All motors and electrical components shall conform to NEMA standards.
22..00 FFAANN HHOOUUSSIINNGG
A. Fan housing shall be constructed of welded heavy gauge steel panel and frame.
B. Fan panel shall have a deep venturi for smooth air entry, and shall be suitable for standard or reverse
air flow, as required.
C. Fan housing and adjustable motor base shall be coated with an air dried gray enamel finish.
33..00 FFAANN IIMMPPEELLLLEERR
A. Axial impeller shall be constructed of spark resistant die cast aluminum airfoil shaped blades secured
to a die cast aluminum hub assembly.
B. Axial impeller blades shall be of adjustable pitch construction with multiple hub-to-blade arrangements
to maximize air performance. Blade pitch angles shall be factory set.
C. Axial impeller hub shall be designed to incorporate a split taper bushing, and be keyed directly to drive shaft.
44..00 FFAANN MMOOTTOORR AANNDD DDRRIIVVEE
A. Motor shall be TEFC industrial duty and conform to NEMA standards.
B. Motor shall be of voltage, horsepower, RPM and enclosure as indicated on the fan schedule.
C. Fan sheaves shall be cast iron and appropriately sized and aligned.
D. Fan belts shall be static conducting, plus oil and heat resistant.
E. Fan shaft shall be steel, turned, ground and polished.
F. Fan shaft bearings shall be lubricated, self-aligning ball type in cast iron pillow block mounts with
external grease fittings.
55..00 OOPPTTIIOONNAALL FFAANN AACCCCEESSSSOORRIIEESS
A. Where indicated, fan shall be provided with the following optional accessories:
• Bird screen for shutters • Propeller side guard • Motor side guard
• Weather hood complete with bird screen • Variable pitch sheaves • Mounting boot
• AMCA spark resistant construction • Motor operated shutter • Gravity shutter
• Protective coatings for fan housing • Motors
- Epoxy - Special Duty
- Eisenheiss - Explosion Proof
66..00 FFAANN TTEESSTTIINNGG
A. Axial impeller shall be balanced and mounted in fan assembly.
B. Fan assembly shall be run and tested prior to shipment.
C. A test report shall be maintained on file for each individual fan.