Filter
Top Products
Technical Service Manual
11
Installation sequence
Before starting the unit
1. Select a suitable location, making sure you have easy access to an
electrical outlet.
2. Install the flexible exhaust hose and adjustable window slider kit as
depicted in Fig.8.4
Fig.8.4
NOTE: 1. Step 2 is required only if operating in cooling or dry mode, In
cooling mode, you can install both hoses or just the air
discharge hose. In dry mode install only air discharge hose.
2. When operating, the hoses should not be blocked by curtains
or other objects.
3. Plug the appliance into an 115V/60Hz grounded electrical outlet.
Note: Do not use a regular extension cord.
4. To start the appliance, press On/Off button.
Notes
z Please read this manual before installing and using this
equipment
z Test run the air conditioner after installing and record details of
operation.
z Type of fuse used on indoor unit controller is 50T, with rating 2.5
A, T, 250V.
z The fuse for the unit is to be provided by the user according to
the current at maximum power input. Alternatively, used a
over-current protective device.