To Fill Tank (Coleman® Fuel Bottle)
NEVER FILL OR LIGHT STOVE INSIDE HOUSE, CAMPER, OR TENT.
6
■ Unscrew bottle from pump assembly (Fig. 8).
■ Use a funnel or suitable filling device and fill with clean, fresh Coleman® fuel
(see Section 4 for list of approved fuels).
■ Fill bottle no more than 3/4 full (17.8 Fl. Oz.). Overfilling can result in fuel
leakage and flare up during lighting. The mark on the decal can be used to
check the fuel level (Fig. 9).
■ Make sure FUEL VALVE is fully “OFF” (Fig. 10).
■ Check pump seal for damage and carefully insert pump assembly into fuel
bottle and hand tighten (Fig. 11).
■ Replace FUEL CAP on fuel container. Tighten firmly. Move fuel container
away from stove. WIPE UP ANY SPILLED FUEL AND DISPOSE OF IN A
SAFE PLACE.
FIG. 9 FIG. 10
FIG. 11
FIG. 8
English-8
PUMP ASSEMBLY
BOTTLE
PUMP SEAL
3/4
Full
FUEL VALVE