Filter
Top Products
10009816
9
Service Instructions
W A R N I N G :
D i s c o n n e c t
power before
attempting any
maintenance or clean
-
ing to reduce the risk of
fire, electrical shock or
personal injury.
• Remove Front Cover
Access to heater/fan
1. Turn off power to the unit.
2. Let fireplace cool if it has been
operating.
3. To remove the doors, locate
and remove the two (2) screws
holding the door at the top.
(Fig. 2) Hold the door at all
times with one hand to prevent
the door from falling when you
undo the hinge screws.
4. Locate the screws that hold the
front cover in place. There are
six (6) screws, three (3)
located on the front of the
unit (Fig. 3), and three (3)
located underneath the top
shelf of the unit. (Fig. 4)
5. Remove screws using
appropriate screwdriver.
6. Pull out the front cover.
holding both sides of the
cover, pull gently towards
you and down.
7. You now have access to
the heater/fan unit, for cleaning
and/or maintenance.
8. To reinstall the front cover,
please follow reverse proce
-
dure, paying attention not to
damage any wiring in the pro
-
cess.
Remove
Screws
FP1733
Figure 2
Remove Screws
FP1734
Figure 3
Remove Screws
Figure 4
Figure 5
FP1736