Cisco Systems PG30 G-.TN Burner User Manual


 
20
SUNTEC AS oil pumps
- Oil
- Flow up to 75 1/h (c.600,000 kcal/h - 700 kW)
- Twin-pipe system
- Single-pipe system
Technical data
Mounting On flange or hub in acccordance with
standards DIN 24220 and ISO/TC 109 SC
3 DP 5062F
Threads round-headed in accordance with ISO R
228-NFE 03005(DIN2S9)
Supply and return R 1/4"
Delivery R 1/8"
Pressure R 1/8"
On cover R 1/8"
Valve function Pressure control and cut out
Filter area 34 cm
2
,
120 micron
Shaft 8 mm in acc. with DIN 24220
Plug Inserted
By-pass Insert for twin-pipe, remove for single-
pipe system
Weight 1,8 kg - hub-mounted
1,9 kg - flange-mounted
Rotation and delivery position (view from shaft side)
A - clockwise rotation/RH delivery
C - anticlockwise rotation/LH delivery
Hydraulic data
Operational pressure range
7-14 bars adjustable
9-15 bars adjustable (for AS67)
Calibration 9 bars at factory
Viscosity at 20°C 2-12mm2/s (cSt)
Supply pressure max.2 bars
Return pressure max.2 bars
Suction max. vacuum 0,5 bars;
recommended 0,35 bars to
avoid separation of oil and gas
Rotational speed 2850 rpm
Max. oil temperature 70°C
Torque 1,0cm - daN
Absorbed capacity see motor curves
Electrical data
Solenoid voltage 20V +10%-15%; 50/60Hz
Absorbed capacity 9VA
Length of coil cable 600mm
Length of plug cable 600mm
Cable Ø6 mm with cross section of
0,75 mm
2
Oil under suction
Oil under pressure
By-passed oil returned to
tank or to suction
Twin pipe installation Single pipe installation (remove the by-pass plug “P”)
A Closed solenoid valve
B Open solenoid valve (NO)
C Closed return
1 Solenoid valve
2 Pressure regulating valve
3 Pressure adjustment
4 To nozzle
5 Pressure gauge port
6 Escape valve
7 Shaft seal
8 Vacuum gauge port
9 By-pass plug “P”
10 Gear set
11 Inlet
12 Return
13 Back to suction
APPENDIX