Chromalox RAD-2063BX35 Electric Heater User Manual


  Open as PDF
of 6
 
DIVISION
4
SECTION
RAD
SALES
REFERENCE
DATE
SERVICE REFERENCE
Installation, Operation
and
RENEWAL PARTS IDENTIFICATION
161-048215-001
APRIL, 2005
Chromalox
PG404-10
(Supersedes PG404-9)
© 2010 Chromalox, Inc.
Volts kW
Model Overall Heated
RAD-2063BX35 120 0.4 13-5/8 7-3/4
RAD-2063BX29 120 .65 20 14-1/8
RAD-2083B 120 or 240 0.8
24-3/8 16-1/2
RAD-2083BV 208 or 275 0.8
RAD-3113B 120 or 240 1.1
30-5/8 22-3/4
RAD-3113BV 208 or 275 1.1
RAD-3133BV 208 or 275 1.3
35-7/8 28-5/16
RAD-3133B 240 or 480 1.3
RAD-4183BV 208 or 275 1.8
46-5/8 38-1/2
RAD-4183B 240 or 480 1.8
RAD-5213BV 208 or 275 2.15
53-7/8 45-7/16
RAD-5213B 240 or 480 2.15
RAD-5253BV 208 or 275 2.5
61-3/8 53-3/8
RAD-5253B 240 or 480 2.5
RAD-6273BV 208 or 275 2.7
65-7/8 58-1/4
RAD-6273B 240 or 480 2.7
RAD-6303BV 208 or 275 3.0
73-3/4 65-3/4
RAD-6303B 240 or 480 3.0
RAD-7333BV 208 or 275 3.35
79-7/8 72-1/4
RAD-7333B 240 or 480 3.35
RAD-7363BV 208 or 275 3.6
85-3/4 78
RAD-7363B 240 or 480 3.6
RAD-8453BV 208 or 275 4.5
106 97-1/2
RAD-8453B 240 or 480 4.5
Specifications Table –
The Safety Alert Symbol is used to indicate a
risk of personal injury
Familiarize yourself with these instructions before attempting
to install or operate this Radiant Heater.
The system designer is responsible for the safety
of this equipment and should install adequate
back-up controls and safety devices with their
electric heating equipment. Where the conse-
quences of failure could result in personal injury or
property damage, back-up controls are essential.
Before Installing
1. Open carton and remove heater at the place of installation.
Mounting clamps are in parts bag in carton.
2. Check nameplate volt and watt rating against your power sup-
ply voltage and heating requirements of your installation. This
nameplate is located on one end of the heater.
Length (In.)
Type RAD (Style 3B) Electric Radiant Heaters
!
next