Chief Manufacturing PST 2000 Series Indoor Furnishings User Manual


 
Chief Manufacturing, a division of Milestone AV Technologies 8804-000255 Rev F
8401 Eagle Creek Parkway, Savage, MN 55378 ©2008 Milestone AV Technologies
P: 800.582.6480 / 952.894.6280 F: 877.894.6918 / 952.894.6918 10/08
INSTALLATION INSTRUCTIONS
LARGE FLAT PANEL DISPLAY STATIC MOUNT
PST 2000 Series
The PST static wall mount accommodates large flat
screens weighing up to 200 lbs (90.72kg). The teardrop
holes in the mount allow for quick connect/disconnect of
the screen, thus simplifying installation and maintenance
processes.
The top and bottom mounting brackets are adaptable to
supporting framework with wood studs that are 16” on
center or 24”on center.
The mount has integrated lateral shift, allowing for four
different mounting options. For dual wood studs 16” on
center, the lateral shift is
+
4.5 inches. For dual wood
studs 24” on center, the lateral shift is
+
0.5 inches.
After installing the flat screen on the mount, the screen
can be locked in place using the convenient locking flag.
A padlock can be used on the latching flag for added
security.
The mount is concealed behind the display, making it a
low profile wall mount.
! IMPORTANT: If the installation of this product
requires OSHPD seismic approval, refer to OSHPD
pre-approval documents and drawings before beginning
installation. OSHPD documents and drawings are
available at www.chiefmfg.com
, and located on the
product information page for the mount.
PST 2000 Series
BEFORE YOU BEGIN
CAUTION: To prevent damage to the mount, which could affect or void the Factory warranty, thoroughly
study all instructions and illustrations before you begin to install the mount brackets. Pay particular atten-
tion to the “Important Warnings and Cautions” on Page 2.
The mount is designed to be installed using wall studs or supporting framework. The fasteners used to anchor the
mount must be capable of supporting five times the total weight of the equipment.
The maximum weight to be installed on the PST mount is 200 lbs (90.72kg).