Chicago Electric 93175 Home Safety Product User Manual


 
SKU 93175 For technical questions, please call 1-800-444-3353 Page 5
Maintenance
1. Store in a clean and dry location.
2. Charge the Battery (2) after each use, whenever performance starts to
diminish, and every three months if not used.
3. Repairs to the Spotlight should be done by a qualified technician.
Battery Replacement
1. Unlatch and open the Back Cover. See photos on the previous page.
2. Remove the four screws of the Battery Bracket (9).
3. Slide out the Battery (2) and carefully pull off each wire lug from the terminals.
Caution: Never use both charging cords at the same time. Damage will occur to
the charging system. To avoid running down the vehicle battery, it is recom-
mended to charge the Spotlight while driving, or with the engine running in a
well ventilated area.
3. Plug in the charging plug adapter.
The Charging Status Indicator turns red, indicating charging. The Battery (2)
will charge for approximately 5 hours if the Car Adapter Plug (7) is used, or 7
hours if the AC Charger Plug (8) is used.
Monitor the Charging Indicators. When charging is complete, the Charging
Status Indicator changes from red to green, indicating charging is complete.
4. When charging is complete, immediately unplug the charging cord adapter
from the power source and store again in the adapter compartment of the
Spotlight. Latch the Back Cover.
Operation
Warning: Avoid eye damage. Do not shine light directly into the eyes of people
or animals. This Spotlight emits a high intensity beam and could cause tem-
porary blindness if shinned directly into the eyes.
1. To turn the Spotlight on, hold the Rubber Handle Grip with one hand, and
push the On/Off Switch (6) with the other.
2. To position the Spotlight at rest, loosen the Stand (3) Lock knob and move the
Stand to the desired position. Tighten the knob again.
3. To turn the Spotlight off, push in on the On/Off Switch (6).