Filter
Top Products
Page 9SKU 93035 For technical questions, please call 1-800-444-3353.
UNPACKING
When unpacking, check to make sure that the product is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
OPERATING INSTRUCTIONS
NOTE: For additional information regarding the parts listed in the following pages, refer
to the
Assembly Diagram on page 12.
Reminder: This product is not to be used for medical or sanitizing purposes.
The Ultrasonic Cleaner is designed to clean: Jewelry, Eyeglasses, Personal Hygiene
items (i.e. electric shaver heads, razors, combs, dentures), Metal Tableware, Coins,
Metal Parts, and other similar items.
Note: Harbor Freight Tools is not responsible for the items cleaned in the Ultrasonic
Cleaner.
Warning: Make sure your hands are dry before contacting the Ultrasonic Cleaner. Wet
hands in contact with electrical products may result in serious electrical shock.
How it Works: Ultrasonic cleaning occurs when air bubbles are constantly imploded
due to ultrasonic action. The result splits dirt into tiny granules, separating it from
the surface of the item.
1.
WARNING: Always make sure the Power Cord of the Ultrasonic Cleaner is
unplugged from its electrical outlet
prior
to making any adjustments to the tool.
2. Open the Lid (2) and fill the Inner Tank (6) with cool water. Make sure you fill the
tank above the MIN line, and below the MAX line. See FIGURE 1 below.
3. Place the items to be cleaned in the Inner Tank (6). If the items are very small, you
may place the Basket (3) over them to keep them together. Refer to the Assembly
Drawing on page 12.
FIGURE 1
MIN
MAX