Filter
Top Products
4. Operating Instructions 10 11/19/2010 11:07 AM
Sound-Active
Access this mode via the DIP switches on the back of the fixture. The chart on the previous page may be used
to alter playback parameters.
Please see the instructions below for details on entering this mode.
1. Unplug any DMX controller.
2. Turn the microphone sensitivity adjustment knob fully clockwise.
3. If the sensitivity to music is too high, you may rotate the microphone sensitivity adjustment knob
counter-clockwise until the desired level has been reached.
The unit will exit sound-active mode if you rotate the microphone sensitivity adjustment knob fully
counter-clockwise!
The microphone will only respond to low frequencies (bass).
DMX Channel Values
6-CH Mode
C
HANNEL
V
ALUE
F
UNCTION
1
000 Ù 005
006 Ù 255
Dimmer
Blackout
1%~100%
2
000 Ù 005
006 Ù 255
Strobe
Open
Strobe: slow~fast
3
000 Ù 255
Pan
0°~180°
4
000 Ù 255
Tilt
0°~90°
5
000 Ù 029
030 Ù 059
060 Ù 089
090 Ù 119
120 Ù 149
150 Ù 179
180 Ù 209
210 Ù 239
240 Ù 249
250 Ù 255
Operating Mode
Open (white)
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Gobo Wheel Rotate (use CH.6 to control the speed)
Sound-Active
6
000 Ù 009
010 Ù 255
Gobo Wheel Rotate Speed (use when CH.5 is between 240
Ù
249)
Stop
Slow~fast
1 2 3 4 5 6 7