Filter
Top Products
OPERATING INSTRUCTIONS
Control Board
On the control panel you can set the DMX address, reset the fixture and change fixture personality
trait.
[MENU] Toggles menu functions.
[SELECT] Changes menu function status and is used to set DMX address.
Control Board Functions (All)
FUNCTION OPTIONS NOTES
Addr 000~512 DMX channel addressing
LP.ti 001
Used lamp time
Pressing ••
simultaneously zeroes lamp counter.
Shut Off/On
Off: Normal
On: Shutter closes during the changing of color, gobos
or prism. Shutter will open after color, gobo or
prism is in position.
CoLo Off/On
Off: Color wheel gradually advances to the next color
allowing the user to stop between colors.
On: Color wheel will jump to the next color.
Focu Off/On Off: Normal On: Focus adjustment
r.PAn Off/On
Off: Left to right head movement (Pan Normal)
On: Right to left head movement (Pan Inverted)
r.tilt Off/On
Off: Down to up head movement (Tilt Normal)
On: Up to Down head movement (Tilt Inverted)
16.br Off/On Off: 8 bit control mode On: 16 bit control mode
deMo Off/On Off: Normal On: Self-demo
SoFt Off/On
Off: Quick paced function demonstration
On: Slow paced function demonstration
Note: Only works with deMo = On
dP.SE Off/on
Off: Display off, press any key to turn on display
On:
Display On
rSEt Off/On
Off: Normal
On: Reset all motors at once
dF.SE Off/On
Off: Normal
On: Resets all wheels to factory defaults
defaults to “Off” position
LAMP Off/On Off: Lamp Off On: Lamp On
turn
Off/On Off: Normal On: Reverse display
CHnL
Off/On
Off: Assign Pan & Tilt’s DMX address to channel 11-14
On: Assign Pan & Tilt’s DMX address to channel 1-4
Fi.ti
001
Fixture use timer. Press ▼▲ simultaneously for 3 seconds
to zero the timer. Unit: hour
LEG-6000 User Manual 9 Revision: 2007-03-06/09:06