Filter
Top Products
LED Followspot 75 QRG
Page 4 of 8
AC Power
This product has a switchable power supply that can work with an input
voltage of 115 VAC or 230 VAC, 50/60 Hz.
Fuse
Replacement
1. Disconnect this product from power.
2.
Using a Phillips #2 head screwdriver, unscrew the fuse holder cap from
the housing.
3. Remove the blown fuse.
4. Replace with a good fuse of the same type and rating.
5. Screw the fuse holder cap back in place and reconnect power.
DMX Linking
The LED Followspot 75 can work with a DMX controller when linked using
a regular DMX serial connection.
If you are not familiar DMX, download the DMX Primer
document from
www.chauvetlighting.com.
DMX Connection
The LED Followspot 75 uses a regular DMX data connection for its
3-channel DMX personality.
Download the LED Followspot 75 user manual and refer to the Setup
chapter to learn how to connect this fixture for DMX operation, and the
Operation Instructions
chapter to learn in detail how to configure this fixture
for DMX operation.
Master/Slave
Connection
The LED Followspot 75 uses the DMX data connection for its Master/Slave
mode.
Download the LED Followspot 75 user manual and refer to the Setup
chapter to learn how to connect this fixture for Master/Slave operation, and
the Operation
chapter to learn in detail how to configure this fixture for
Master/Slave operation.