Filter
Top Products
LOCK
LIGHT
LOCK
LIGHT
Accessories Available for your Opener
953CB
7702CB
SECURITY✚ Multi-Function
Remote Control:
Includes visor clip.
Outside Quick Release:
Required
for a garage with NO
access door.
8 foot Rail Extension Kit:
To allow an 8 foot door to open
fully.
7704CB
10 foot Rail Extension Kit:
To allow a 10 foot door to open
fully.
8710CB
940CB
38
To Add the Keyless Entry
We recommend that you program your password
before you install the Keyless Entry. You will not
need assistance, and you can test the reception at
the mounting location before installation.
If you have a Multi-Function door control:
1.
With the door closed,
press the four digit password
desired, then press and hold Enter.
2. Press and hold the light button on the door control.
3. Press and hold the door control push bar.
4. After the opener lights flash, release all buttons.
If you do not have a Multi-Function door control:
1. Choose a 4-digit password using numbers from 0 to 9
(a number can be used more than once, for example,
4, 0, 4, 1).
2. Press the four buttons for the password, then press
and
hold
the Enter button. The indicator light on the
door opener panel will blink.
3. Press and release the “Smart” (learn) button on the
opener panel. After the opener lights flash, release the
Enter button.
Test by pressing the password, then press Enter. The
door should begin to move.
Setting a Temporary Password
In addition to your personal entry password which works at
all times, a 4-digit temporary password can be added for
the convenience of visitors or service persons. This allows
authorized persons a way to gain temporary access.After a
programmed number of hours or number of accesses, this
temporary password expires and will no longer open the
door. The temporary password can be used to
close
the
door even after it has expired. To set a temporary
password:
1. Press the four buttons for your personal entry password
(not the last temporary password), then press and hold
the ✽ button.
The opener light will blink three times. Release the
button.
2. Press the temporary 4-digit password you have chosen,
then press Enter.
The opener light will blink four times.
3. To set the number of
hours
this temporary password
will work, press the number of hours (up to 255), then
press ✽.
OR
3. To set the number of
times
this temporary password will
work, press the number of times (up to 255), then press
#.
The opener light will blink once when the temporary
password has been learned.
Test by pressing the four buttons for the temporary
password, then press Enter. The door should move. If the
temporary password was set to a certain number of
openings, remember that the test has used up one
opening.
To clear the temporary password, repeat steps 1-3, setting
the number of hours or times to 0 in step 3.
945CB
935CB
SECURITY✚ Keyless Entry:
Enables homeowner to operate
garage door opener from outside
by entering a password on a
specially designed keyboard. Also
can add a temporary password for
visitors or service persons. This
temporary password can be
limited to a programmable number
of hours or entries.
SECURITY✚ Multi-Function
Mini Remote Control:
With key ring and Velcro
fastening strip.
Multi-Function Door Control
Panel:
Provides a Lock Feature which
prevents operation of garage door
opener from portable remotes and
a Light Feature for constant light.
Motion Detecting Control Panel:
Multi-function door control with
motion sensor that automatically
turns opener lights on for 5 minutes
when it detects a person entering
the garage. Sensor can be easily
deactivated when desired.
956CB