Filter
Top Products
8
20003889
1. Place the Elevated Grate Steps onto the back
of the Grate and attach the Fettel to front of
Grate as shown in Figure 7.
2. Place the Grate over the Burner Pan so the
front legs of the Grate are 1” behind the front
edge of the Pan, as shown in Figure 8.
3. Place the larger bottom logs (longer log in
back, shorter (2) in front) onto the grate,
leaving as much space between themas
possible. (Fig. 8) When burning, the flames
should come up directly between these two
logs.
4. Next, place the smaller top logs diagonally
onto the bottom logs. The top logs can be
arranged to achieve your desired flame pat-
tern. Refer to Figures 9, 10, and 11 (R18CFL,
R24CFL, and R30CRL). Be sure you leave as
much open space between the logs as pos-
sible to minimize flame impingement and
sooting.
5. Open the bag of Lava Rock and spread the
rocks onto the fireplace floor around the burner
pan for decorative purposes. (Fig. 6)
Grate and Log Placement
R18CFL, R24CFL and R30CFL Log Sets
Figure 7
Fettel Cast
Front Grate
Grate
Clip
Grate
Grate Steps
1"
Figure 8
CFM130
Front (2)
Shorter Logs
Long
Log
R18CFL Log Set
Figure 9
LG371
Figure 11
R30CFL Log Set
LG373
R24CFL Log Set
Figure 10
LG372