Filter
Top Products
15
Dutchwest Non-Catalytic Convection Heater
30002314
Distance from Center of Flue Collar to Wall in Top-Exit Installations
Dutchwest Convection Heater Model 2477
NOTE: These are not clearance distances. These measurements indicate where the centerline of the flue col-
lar will be for various installations. Measurements are from the centerline of the flue collar to the wall, not the
wall protector.
ST427
dutchwest
flue centerline
6/30/00 djt
A
B
C
E
D
F
C
F
Chimney Connector Side Rear Corner Side Rear Corner
Listed, Approved (A) 35” (B) 13” (C) 19⁵⁄₈” (D) 21” (E) 13” (F) 19⁵⁄₈”
Double-wall, with (889 mm) (330 mm) (499 mm) (533 mm) (330 mm) (499 mm)
flue collar shield
Single wall, with (A) 28” (B) 12” (C) 18⁵⁄₈” (D) 19” (E) 9” (F) 16¹⁄₈”
Connector heat shields (711 mm) (305 mm) (473 mm) (483 mm) (229 mm) (410 mm)
and flue collar shield
Single wall with no (A) 35” (B) 22” (C) 26⁵⁄₈” (D) 19” (E) 17” (F) 22⁵⁄₈”
heat shields (889 mm) (559 mm) (676 mm) (483 mm) (432 mm) (575 mm)
UNPROTECTED SURFACES PROTECTED SURFACES
Corner Corner
Parallel Installations Installations Parallel Installations Installations
ST427