Filter
Top Products
6
BLADE/BLADE HOLDER INSTALLATION
Step 9. Rotate the flywheel so that the
screw holes can be accessed through the
recessed area of the metal plate.
Attach each blade/blade holder assem-
bly to the motor.
Tighten securely by hand only.
BLADE HOLDER
SCREW
(2 PER BLADE)
Step 8. Attach the blades to the
blade holders by first pressing the
blade badge into the blade, then
installing the blade holder using
the four blade screws provided for
each blade.
Hand tighten securely.
ASSEMBLE BLADE HOLDER & BLADE
BADGE STYLE
BLADE HOLDER
BLADE
BLADE
BADGE
BLADE HOLDERS & HARDWARE
BLADE SCREW
(4 PER BLADE)
BLADE HOLDER SCREW
(2 PER BLADE)
BADGE
METROPOLITAN
™
BLADE SCREW
(4 PER BLADE)
4/5 Blade Combination Flywheel
Your Casablanca fan includes our 4/5 combination fly-
wheel. This flywheel accomodates your preference to
use either 4 or 5 blades on your fan. If you desire a 4-
blade fan, locate the square counterbores on the fly-
wheel and use these threaded holes to mount the blades.
If you desire a 5-blade fan, locate the round counterbores
on the flywheel and use these threaded holes.
= 4-blade mounting hole
= 5-blade mounting hole