Filter
Top Products
www.CasablancaFanCo.com
1.888.227.2178
Switch Housing
Screw two housing assembly screws from
the hardware bag halfway into the
mounting plate. It does not matter which
two screw holes you choose.
Feed the optional light kit wires through
the center hole of the upper switch
housing, then wrap keyhole slots around
the screws and twist counterclockwise.
Insert the third screw, found in
the hardware bag, into place and
then tighten all three screws.
Make sure the upper switch housing is securely
attached to the mounting plate. Failure to properly
secure all 3 assembly screws could result in the switch
housing xture falling.
M6006-01 • 02/12/16 • © Casablanca Fan Company
13