Casablanca Fan Company 59500 Fan User Manual


 
www.CasablancaFanCo.com
1.888.227.2178
Switch Housing
Screw two (2) housing assembly screws
from the hardware bag halfway into
the mounting plate. It does not matter
which two screw holes you choose.
Feed the wire plug through the center
hole of the upper switch housing, then
wrap keyhole slots around the screws and
twist counterclockwise.
Insert the third screw, found in
the hardware bag, into place and then
tighten all three (3) screws.
Make sure the upper switch housing is securely
attached to the mounting plate. Failure to properly
secure all 3 assembly screws could result in the switch
housing xture falling.
13
M6013-01 • 02/12/16 • © Casablanca Fan Company