Filter
Top Products
www.CasablancaFanCo.com
1.888.227.2178
8
M8521-01 • 10/30/14 • © Casablanca Fan Company
Downrod (continued)
8”
3/8”
C
U
T
&
S
T
R
I
P
(not to scale)
Remove the pre-installed
setscrew so that the downrod
can be inserted.
Thread the downrod through
the decorative arm cup and
into the fan. Hand tighten the
downrod (at least 4-5 full turns)
until it stops.
The wires can be cut, but
leave at least 8” extending
from the top of the downrod.
8”
3/8”
Tighten the setscrew
with pliers. DO NOT
HAND TIGHTEN.
If the setscrew is not tightened
securely, the fan may fall.
K
E
E
P
!