Filter
Top Products
www.CasablancaFanCo.com
1.888.227.2178
13
M6023-01 • 12/02/13 • © Casablanca Fan Company
Switch Housing
Feed the wire plug through the center
hole of the upper switch housing, then
wrap keyhole slots around the screws and
twist counterclockwise.
Screw two housing assembly screws
from the hardware bag halfway into
the motor housing. It does not matter
which two screw holes you choose.
Make sure the upper switch housing is securely
attached to the mounting plate. Failure to properly
secure all 3 assembly screws could result in the switch
housing xture falling.
Insert the third screw, found in
the hardware bag, into place and then
tighten all three screws.