Filter
Top Products
www.CasablancaFanCo.com
1.888.227.2178
13
M8517-01 • 11/11/13 • © Casablanca Fan Company
13
Remote Control
Remove battery door. Change the
dip switch settings if the frequency
matches a previously installed remote
transmitter. Install A23 or MN21
alkaline battery in the proper polarity
and replace the battery door. To pair
the remote, hold down the Set button
for 5 seconds. Pairing is complete
when LED button ashes twice.
To install the transmitter
cradle, hand-tighten the
provided screws to mount the
cradle to the wall.
If a light kit is installed on your
fan, choose the light bulb
mode by moving the toggle
switch. For halogen bulbs, set
the switch to “ON.” Replace the
battery door.
ON
D
ON
D
ON ECE
1234
SET
Battery
Set
ON
D
ON ECE
1234
ECEON
1234
SET
Battery
Door
Once the power
is turned on, the
remote must be
paired within 60
seconds. Pairing
is only required
once after initial
installation.
ON
Turn Power