Filter
Top Products
www.CasablancaFanCo.com
1.888.227.2178
Tuck the wires into the light kit, then lift the
light xture and align the screw holes in
the light xture with the screw holes in the
light kit. Install the three light xture screws,
found in the hardware bag.
Install a halogen bulb in each socket.
When necessary, replace with bulbs of
the same type and wattage.
Light Kit (continued)
Make sure the light xture is securely attached to the light kit.
Failure to properly secure all 3 assembly screws could result
in the light xture falling.
Using the ceramic wire connectors, connect
the blue wire from the fan to the blue wire
from the light kit. Connect the white wire from
the fan to the white wire from the light kit.
Note: Be sure to use the CERAMIC wire
connectors to avoid re hazard.
M8505-01 • 10/30/14 • © Casablanca Fan Company
16