Filter
Top Products
www.CasablancaFanCo.com
1.888.227.2178
10
M8506-01 • 10/30/14 • © Casablanca Fan Company
Use wire strippers to remove the
crimp connector from the end of the
red wire on the receiver.
Using the wire connectors from the
remote control hardware bag:
• Connect the white wire from the
receiver (marked “common out”)
to the white wire from fan.
• Connect the black wire from the
receiver (marked “fan out”) to
the black wire from the fan.
• Connect the blue wire from the
receiver (marked ”light 1 out”) to
the blue wire from the fan
• Connect the red wire from the
receiver (marked ”light 2 out”) to
the red wire from the fan.
F
R
O
M
R
E
C
E
I
V
E
R
Using an orange wire connector from
the hardware bag:
• Connect the black wire
(ungrounded) from the ceiling to
the black wire from the receiver
(marked “live in”).
• Connect the white wire (grounded)
from the ceiling to the white wire
from the receiver (marked “neutral
in” or “common in”).
F
R
O
M
C
E
I
L
I
N
G
black (ungrounded)
white (grounded) white (neutral in)
black (live in)
Turn the splices upward and push them carefully back through the hanger bracket
into the outlet box. Spread the wires apart, with the grounded wires on one side of
the outlet box and the ungrounded wires on the other side of the outlet box.
Refer to CAUTION c.1 on pg. 2
Wiring (continued)
F
R
O
M
R
E
C
E
I
V
E
R
white
black
blue
white (common out)
black (fan out)
blue (light 1 out)
F
R
O
M
F
A
N
red
red (light 2 out)