Filter
Top Products
www.CasablancaFanCo.com
1.888.227.2178
KEEP!
Remove the pre-installed
setscrew so that the downrod
can be inserted.
Downrod (continued)
8”
3/8”
Tighten the setscrew
with pliers. DO NOT
HAND TIGHTEN.
If the setscrew is not tightened
securely, the fan may fall.
K
E
E
P
!
8”
3/8”
C
U
T
&
S
T
R
I
P
(not to scale)
Slide the adapter cover onto
the downrod, then hand
tighten the downrod (at least
4-5 full turns) until it stops.
The wires can be cut, but
leave at least 8” extending
from the top of the downrod.
Note: e adapter cover is not
used for low-profile mounting.
8
M8501-01 • 01/21/14 • © Casablanca Fan Company