Carrier TP-PHP Thermostat User Manual


 
2
INTRODUCTION
Carrier’s 7day, 5/2day, 1day programmable and nonprogrammable
Performance Series Thermostat Control is a wallmounted, lowvoltage
temperature control in either a single unit or a twopiece unit. In twopiece
configuration, the relays are located near the equipment and a twowire
connection is used between the Display Module and the Equipment Control
Module. Singlepiece installation requires more wiring and results in a higher
profile. The Edget Thermostat has no need for batteries to store
userconfigured settings in memory. During power loss its internal memory
saves settings for unlimited time, and the clock continues to run for at least 24
hours. An extension of Carrier’s proven line of thermostats; it provides separate
setpoints for heating and cooling.
In the Edge Thermostat Control programmable configuration, different heating
and cooling setpoints and times are programmable for 4 periods per day or 2
periods per day. Programming can be done for 7 days per week, 5/2 days per
week, or 1 day. The programmable Thermostat Control can also be user
configured as a nonprogrammable Thermostat Control.
The nonprogrammable Thermostat Control features Touch ’N’ Got settings
for quick and easy temperature change without complicated programming
schedules. And, its Touch ’N’ Go technology enables the user to switch between
three different userconfigurable settings through intuitive buttons located just
below the display.