Cal Flame BBQ08899P Burner User Manual


 
Appendix
21
Cal Flame Side Burners
LTR50001082, Rev. B
www.calspas.com
WARNING! You must have an authorized service technician
perform this procedure. If these instructions are not followed
exactly,areorexplosionmayresultcausingpropertydam-
age, personal injury or loss of life. Lloyd’s Material Supply
(LMS) will not be held responsible for an improperly converted
gas side burner.
All Cal Heat side burners are manufactured to use standard liquid pro-
pane (LP) and can be converted to burn natural gas (NG).
You will need one or two orices (depending on the size of the side
burner), contained in the conversion kit provided with the side burner.
The conversion kit contains orices to convert ve main burners, two
small rear infrared burners, one large infrared burner, and two side
burners. You will not need all of the parts in the kit.
Before you begin, make certain the LP gas source has been discon-
nected.
Replacingthesideburnerorices
Remove the grate, burner cap and burner diffuser from the side 1.
burner.
Using a 7mm wrench, remove the orice for the burner.2.
Apply a small amount of pipe compound to the orice threads.3.
Screw in the orice until it is nger tight.4.
Tighten the orice with the 7mm wrench.5.
If you have dual side burners, repeat the previous steps for the 6.
second burner.
When converting an LP side burner that is connected to
an LP grill, you MUST convert both appliances.
It is dangerous to have an LP appliance and an NG appliance
supplied by the same fuel.
Converting Side Burner from LP to NG