Filter
Top Products
7
MAINTENANCE
CAUTION:
Always be sure that the heater is switched OFF, unplugged and completely
cooled before cleaning or attempting to store the item. Do not immerse heater
in water or allow water to drip into the interior of the heater, as this could
create an electric shock hazard.
Please Note: Regardless of the type of heating system setup, always install and
maintain at least one smoke detector in good working condition on each floor of your
home. Periodically check and/or replace the battery in your smoke detector with a fresh
battery.
CARE AND CLEANING
1. Always turn off the heater and disconnect the cord from the electrical outlet
before cleaning your heater.
2. Light accumulated dust may be removed from the heater with a soft cloth or
vacuum cleaner.
3. Clean the outside of the heater by wiping with a damp cloth and buff with a dry
cloth.
DO NOT use any detergents or abrasives and do not allow any water to enter the
heater.
DO NOT allow water to run into the interior of the heater as this could create a
fire or electric shock hazard.
4. The fan motor is lubricated for life and will not require further lubrication.
AIR FILTER
Dirt and dust may be caught on the air filter during operation. The caught dirt and dust
may negatively affect the function of the device. So clean the air filter regularly.
Remove the grill for the inflow of air from back part of the device. Remove the air filter
from the grill. Wash the filter by hand in a lukewarm solution of water and detergent.
Then rinse the filter in clean water and allow it to dry thoroughly. Place the clean, dry
filter back into the back grill and attach it to the device. Do not use the device without
the filter and back grill being installed.
STORING
Allow the appliance to cool completely before storing. Store the appliance in a dry
location. Do not place any heavy items on top of appliance during storage as this may
result in possible damage of appliance. Store the cord in a clean, dry location away
from metal objects. Always check the plug before use to assure metal items have not
become attached
.