Filter
Top Products
5
OPERATION AND USE
BEFORE EACH USE
CHECK HUMIDIFIER PLACEMENT
Place the Humidifier on an elevated, non-metallic, lint-free, waterproof, level surface at
least 2 feet above the floor.
• DO NOT place the humidifier on carpet or a towel. The fan vent is located on the
bottom of the humidifier base. The fan vent MUST NOT be obstructed.
• DO NOT place the humidifier on a wood surface or near furniture that can be
damaged by too much moisture.
CHECK WATER LEVEL SENSOR
Make sure that the Water Level Sensor is secured properly and not obstructed.
CAUTION
DO NOT attempt to operate the humidifier without water in the
Water Tank.
DO NOT plug or unplug the Power Cord with wet hands as electric
shock could occur.
ASSEMBLY
CAUTION:
DO NOT TOUCH STEAM MIST WHEN HUMIDIFIER IS ON. STEAM
MAY CAUSE BURNS. ALWAYS USE CAUTION!
1. Turn Water Tank upside down and unscrew Water
Tank Cap.
2. Fill Water Tank with cool water. DO NOT fill
water all the way to the rim.
DO NOT CARRY FULL WATER TANK BY
HANDLE. ALWAYS HOLD WATER TANK WITH
TWO HANDS.
DO NOT use hot water. Use cool tap water.
DO NOT add any medication, essential oils, or salt to water. USE ONLY included
medicine cup for liquid vapors.
DO NOT pour water into Mist Channel.
DO NOT overfill medicine cup and allow medication to spill into mist chamber.
3. Screw Water Tank Cap back onto Water Tank. Turn the Water Tank over and place
on Humidifier Base, making sure it fits perfectly.
4. Plug the power cord into a wall socket and turn on the unit by using the Control
Knob. The power light will turn BLUE.