Filter
Top Products
INTRODUCTION
Your Bushnell LED Flashlight is a premium flashlight machined from aircraft quality aluminum and employs LUXEON
®
LED’s (Light
Emitting Diode). LUXEON
®
LED’s deliver the brightest solid state lighting available. Unlike typical conventional light sources, LED’s
are brighter, energy efficient, and long lasting. The LED never needs replacement and will function for 100,000 hours. These
Bushnell LED performance lights are o-ringed sealed and waterproof.
BATTERY INSTALLATION / REPLACEMENT
Remove the end cap by rotating counter clock-wise. 3-watt models with the LUXEON
®
III LED (10-0100, 10-0200, and 10-0300)
require two CR123 3-volt Lithium Batteries. Insert both batteries positive end first and replace end cap. If batteries are not inserted
correctly, the unit will not light.
1-watt models (10-0090) using a LUXEON
®
I LED only require one CR123 3-volt lithium battery. Insert battery positive end first and
replace end cap.
3-WATT LED OPERATION
(Models 10-0100, 10-0200, 10-0300)
To power the light on, first depress the power switch located on the end cap. This will activate the translucent .
Next, simply rotate the fluted head clockwise. The rotating head provides multiple performance light settings.
3-WATT MODELS – PERFORMANCE LIGHT SETTINGS
Position 1 = Brightest Light Output
Position 2 = Medium Light Output
Position 3 = Low Light Output
Position 4 = S.O.S.
Position 5 = Safety Strobe
Position 6 = OFF
ENGLISH
32
Flashlight 6LIM.indd 4-5 3/24/06 11:55:40 AM