Filter
Top Products
1-WATT MODELS – PERFORMANCE LIGHT SETTINGS
Position 1 = Brightest Light Output
Position 2 = S.O.S.
Position 3 = Safety Strobe
Once you are finished using the light, simply depress the power switch located on the end cap.
As long as the fluted head has not been rotated while off, the flashlight will return to the Light
Setting last used each time the power switch is depressed.
LUXEON
®
, and the logo are trademarks of Lumileds Lighting.
MAINTENANCE
Gently blow away any dust or debris on the lens (or use a soft lens brush). To remove dirt or fingerprints, clean with a soft cotton
cloth, rubbing in a circular motion. Use of a coarse cloth or unnecessary rubbing may scratch the lens surface and eventually cause
permanent damage. For a more thorough cleaning, photographic lens tissue and photographic-type lens cleaning fluid or isopropyl
alcohol may be used. Always apply the fluid to the cleaning cloth - never directly on the lens.
Remove the batteries if the flashlight is being stored for longer than two months.
Every six months, clean the threads of the battery cap and flashlight tube with a dry cloth and then apply a thin coat of silicon
lubricant to the rubber o-ring.
Once you are finished using the light, simply depress the power switch located on the end cap.
As long as the fluted head has not been rotated while off, the flashlight will return to the Light Setting last used each time the
power switch is depressed.
SECURE OFF MODE
(prevents accidental On/Off)
The flashlight can be stored in the fully off mode with the fluted head in the off position and the
power switch deactivated. This prevents the flashlight from getting powered on accidentally.
FIND-ME
™
FEATURE AND BATTERY LIFE INDICATOR (Glowing Button on end cap)
The glowing button is a multi-functional feature serving as a Find-Me™ feature and Battery Life Indicator.
Find-Me™ feature is especially handy for locating the flashlight in a dark area (i.e. tent, back-pack etc).
Battery Life Indicator - When the button is Green, the battery life is sufficient for operation.
When the button is Red, the battery life will provide approximately another 20 minutes before needing to be changed out with
fresh batteries.
WARNING: Because the 3-Watt LED Flashlight (models 10-0100, 10-0200, 10-0300) is a high light output flashlight, it can reach
high temperatures. Keep away from children. Use Caution when handling.
1-WATT LED OPERATION
(Model 10-0090)
To power the light on, first depress the power switch located on the end cap.
Next, simply rotate the flashlight head clockwise. The rotating head provides multiple performance light settings.
54
Flashlight 6LIM.indd 6-7 3/24/06 11:55:41 AM