Filter
Top Products
About Advanced Features & Operation
Page 19
LOW BATTERY WARNING - When the AA Lithium batteries
reach a preset low power state, the display will flash the
Low Battery icon. After this icon appears change the
batteries within a few weeks. Use only AA Lithium
batteries for proper operation.
Battery Eliminator (optional accessory) - Use only the
Totaline accessory (P474-0800) for proper operation.
3vdc, 50ma output, negative center conductor.
FACTORY DEFAULTS - If, for any reason it is desirable to
return all stored settings back to the factory default
settings, press the Mode button. While holding the Mode
button in, press the Down button for 2 sec. All icons will
appear. Press and hold in the Fan button until Fd
appears. This resets all factory settings.
To calibrate room temperature, press the Mode button.
While holding the Mode button in, press the Down button
for 2 seconds. All icons will appear. Press the Mode
button once more.
At this point use the Up and Down buttons to calibrate
room temperature, if needed. Press the Mode button to
return to normal operation. NOTE CAUTION ON PAGE 1.