Bryant T6-PHP Thermostat User Manual


 
22
must be properly set by the installer. (Only those marked with an asterisk *
below are available to the homeowner.) The homeowner configurations are
described in the owner’s manual. A special procedure allows entry into the
configuration mode. Description of each selection and how to use the
configuration mode follows.
CONFIGURATION OPTIONS SUMMARY
Option 01 Equipment Type
Option 02 Clean Filter Timer Adjustment
Option 03* — Fahrenheit/Centigrade Selection
Option 04 Fan (G) on with W/W1 Selection
Option 05 Room Air Temperature Sensing (programmable
models only)
Option 06 Cooling Lockout Below 55_F/13_C Selection (only
available if outdoor air sensor is present)
Option 07 Zoning
Option 08 Auxiliary Heat Lockout Temperature Setting (only
available when heat pump is used and when
outdoor air temperature sensor is present)
Option 10 Reversing Valve
Option 11 Adjustable Setpoint Deadband
Option 12 Smart Recovery (programmable models only)
Option 13 Room Temperature Offset Adjustment
Option 15 Enable Auto Mode
Option 16 Cycles Per Hour
Option 17 Time Between Stages