Bryant T6-PAC Thermostat User Manual


 
2
INTRODUCTION
Bryant’s 7day, 5/2day, 1day programmable and nonprogrammable
Preferredt Series Thermostat Control is a wallmounted, lowvoltage
temperature control in either a single unit or a twopiece unit. In twopiece
configuration, the relays are located near the equipment and a twowire
connection is used between the Display Module and the Equipment Control
Module. Singlepiece installation requires more wiring and results in a higher
profile. The Preferred Series Thermostat has no need for batteries to store
userconfigured settings in memory. During power loss its internal memory
saves settings for unlimited time, and the clock continues to run for at least 24
hours. An extension of Bryant’s proven line of thermostats; it provides separate
setpoints for heating and cooling.
In the control’s programmable configuration, different heating and cooling
setpoints and times are programmable for 4 periods per day or 2 periods per day.
Programming can be done for 7 days per week, 5/2 days per week, or 1 day. The
programmable Thermostat Control can also be user configured as a
nonprogrammable Thermostat Control.
The nonprogrammable Thermostat Control features Touch ’N’ Got settings
for quick and easy temperature change without complicated programming
schedules. And, its Touch ’N’ Go technology enables the user to switch between
three different userconfigurable settings through intuitive buttons located just
below the display.