Filter
Top Products
2
WELCOME TO EFFICIENT
YEAR--ROUND COMFORT
CONGRATULATIONS! You have made an excellent choice and
sound investment in home cooling comfort! Bryant offers more than
one hundred years of creating customized home comfort systems
with the broadest selection of residential heating and cooling
products available.
Your new Bryant Heat Pump is a product of that experience, and will
provide you and your family with years of dependable, energy
efficient cooling comfort.
This booklet provides information on how your system works as
well as helpful hints on operation and maintenance so you can enjoy
peak performance for years to come. For even greater peace of
mind, your expert Bryant dealer can provide professional
maintenance and service on an annual or as--needed basis to ensure
that your system receives the very best care from the industry
experts. Ask your dealer about scheduling annual maintenance visits
or about the benefits of a service contract. In addition, your
installing Bryant dealer can offer expert recommendations on all of
the Bryant products, accessories and services available to enhance
your comfort through personalized control of your system and
improved indoor air quality.
A NOTE ABOUT SAFETY
Any time you see this symbol in manuals, instructions and on
the unit, be aware of the potential for personal injury. There are
three levels of precaution:
DANGER identifies the most serious hazards which will result in
severe personal injury or death.
WARNING signifies hazards that could result in personal injury or
death.
CAUTION is used to identify unsafe practices which would result
in minor personal injury or product and property damage.
WARNING:
PERSONAL INJURY, DEATH AND / OR
PROPERTY DAMAGE HAZARD
Failure to follow this warning could result in personal
injury, death or property damage.
Improper installation, adjustment, alteration, service,
maintenance, or use can cause explosion, fire, electrical
shock, or other conditions which may cause personal
injury or property damage. Consult a qualified installer,
service agency, or your distributor or branch for
information or assistance. The qualified installer or
service agency must use factory--authorized kits or
accessories when modifying this product.
WARNING:
PERSONAL INJURY, DEATH, OR PROPERTY
DAMAGE HAZARD
Failure to follow this warning could result in personal
injury, death, or property damage.
Read and follow all instructions and warnings,
including labels shipped with or attached to unit before
operating your new air conditioner.
ABOUT YOUR HEAT PUMP SYSTEM
Identifying Your System
Your new Bryant Heat Pump system is what we call a ”split system.”
It has an outdoor unit and an indoor unit connected to each other
with copper tubing called refrigerant lines. Each of these units has a
rating plate with the model and serial numbers you will need to
reference when calling an authorized Bryant dealer about your
system.
Take a few moments now to locate those numbers and record them
in the spaces provide on the cover of this booklet.
USING YOUR NEW BRYANT
SYSTEM
Your Bryant Heat Pump system is controlled by a wall--mounted
thermostat installed inside your home. Because there are so many
thermostats available, please refer to the owner’s manual supplied
with your thermostat for complete details on system operation. Or,
read the next section for basic operating instructions.
SYSTEM OPERATION WITH BASIC
THERMOSTAT
Most basic thermostats have three main controls:
S System or Mode Control: Typically offers the following
selections: Cool, Off, and Heat. Some thermostats also have
Auto, which lets the system switch between heating and cooling
as needed.
S T emperature Control: A button, lever, or set of buttons that
allows you to select the temperature inside your home.
S Fan Control: Typically offers two options: Auto and On.
”Auto” provides slightly higher energy efficiency by circulating
air only during cooling (or heating) operation. ”On” provides
better air circulation, better dehumidification and better air
cleaning by running the system’s blower continuously.
HEATING YOUR HOME
For heating operation, make sure the System or Mode control is set
for Heating. Then, adjust the Temperature control to your desired
setting. Finally, use the Fan control to select Automatic (turns on
and off as heating is needed) or On (runs continuously).
Depending on your typical heating needs, your home comfort
system may also include a supplementary heating source that will
automatically turn on as needed. You may also select this heat
source manually if desired.
COOLING YOUR HOME
For cooling operation, make sure the System or Mode control is set
for Cooling. Then, adjust the Temperature control to your desired
setting. Finally, use the Fan control to select Automatic (turns on
and off as cooling is needed) or On (runs continuously).