Filter
Top Products
—12—
VII. STEP 7 — INSTALL THERMOSTAT
These systems use a 3-speed thermostat. The thermostat
monitors the system operation and controls the operating
mode. To change settings or refer to the thermostat Operat-
ing Instructions.
Mount thermostat to a wall in the occupied space using 2
field-supplied screws. Locate the thermostat in an area that
is not subjected to drafts or direct sunlight through windows.
Locate thermostat on an interior wall whenever possible.
Figure 18 shows available thermostats.
Fig. 15 — Routing Drain Piping
a40-630
LEGEND
TB — Terminal Block
Fig. 16 — Line Power Connections
a40-935