Bryant 602A Heat Pump User Manual


 
NOTE TO INSTALLER: This manual should be left with the
equipment owner.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors and liquids
in the vicinity of this or any other appliance.
WARNING: Do not use this unit if any part has been
under water. Immediately call a qualified service techni-
cian to inspect the unit and to replace any part of the
control system which has been under water. Failure to
follow this warning could result in electrical shock, fire,
personal injury, or death.
WARNING: Before performing recommended mainte-
nance, be sure the main power switch to unit is turned off.
Electric shock could cause personal injury or death.
WELCOME TO EFFICIENT YEAR-ROUND COMFORT
Congratulations on your excellent choice and sound investment in
year-round home comfort!
Your new heat pump represents both the latest in engineering
development and the culmination of many years of experience
from one of the most reputable manufacturers of comfort systems.
Your new unit is among the most energy-efficient and reliable heat
pump products available today. To assure its dependability, spend
just a few minutes with this booklet now. Learn about the
operation of your heat pump, and the small amount of maintenance
it takes to keep it operating at its peak efficiency. With minimal
care, your new heat pump will provide you and your family with
year-round home comfort—both now and for years to come.
SAFETY CONSIDERATIONS
Recognize safety information. This is the safety-alert symbol
.
When you see this symbol on unit or in instructions and manuals,
be alert to potential for personal injury.
Understand the signal words DANGER, WARNING, and CAU-
TION. These words are used with the safety-alert symbol. DAN-
GER identifies the most serious hazards which will result in severe
personal injury or death. WARNING signifies hazards which
could result in personal injury or death. CAUTION is used to
identify unsafe practices which would result in minor personal
injury or product and property damage. NOTE is used to highlight
suggestions which will result in enhanced installation, reliability,
or operation.
WARNING: Improper installation, adjustment, alter-
ation, service, maintenance, or use can cause explosion,
fire, electrical shock, or other conditions which may
cause serious injury, death or property damage. Consult a
qualified installer, service agency, or your distributor or
branch for information or assistance. The qualified in-
staller or agency must use factory-authorized kits or
accessories when modifying this product.
YOUR COMFORT SYSTEM
I. IDENTIFYING YOUR SYSTEM
Take the time to familiarize yourself with your packaged heat
pump type of system. This knowledge will be of use in under-
standing the basic operation of your new heat pump. The unit has
a rating plate affixed to it which provides necessary information
for specific identification of a unit. You should familiarize yourself
with the product, model, and serial numbers listed on each rating
plate. Record them for future reference in the space provided at the
end of this booklet.
IMPORTANT FACTS
To better protect your investment and to eliminate unnecessary
calls, familiarize yourself with the following facts:
1. Your heat pump system should never be operated without a
clean air filter properly installed. Plan to inspect the filter
periodically. A clogged air filter will increase operating
costs and shorten the life of the unit.
2. Supply-air and return-air registers should not be blocked.
Drapes, furniture, and toys are some of the items commonly
found obstructing registers. Restricted airflow lessens the
unit’s efficiency and life span.
Fig. 1—Unit 601A and 602A
User Information Manual
SINGLE-PACKAGED
HEAT PUMP UNITS
Cancels:OM02-59 OM02-63
1-03
601A
602A
—1—