Filter
Top Products
UTILITY STITCHES ——————————————————————————————————————————————————————————————————
——
74
■ For a seam allowance on the left side
(available only on models with 60 or 70
stitches)
Align the left side of the presser foot with the
edge of the fabric, and sew using stitch .
a 6.5 mm (1/4 inch)
Memo
● To change the width of the seam allowance
(the needle position), adjust the stitch width.
Quilting
Sandwiching batting between the top and bottom
layers of fabric is called “quilting”. Quilts can easily
be sewn using the optional walking foot and the
optional quilting guide.
a
Baste the fabric to be quilted.
b
Attach the walking foot.
• For details, refer to “Using the optional
walking foot” (page 35).
c
Select a stitch.
• For details, refer to “Selecting a stitch”
(page 42).
• For details on the stitches that can be sewn
with the walking foot, refer to “Stitch
Settings” (page 89).
d
Place one hand on each side of the presser
foot, and hold fabric taut while sewing.
Note
● When sewing with the walking foot, sew at
a speed between slow and medium.
■ Using the optional quilting guide
Use the quilting guide to sew parallel stitches that
are equally spaced.
a
Insert the stem of the quilting guide into the
hole at the rear of the walking foot or presser
foot holder.
Walking foot
Presser foot holder
b
Adjust the stem of the quilting guide so that
the guide aligns with the seam that has
already been sewn.
Note
● The optional quilting guide is available
through your dealer.
1