Filter
Top Products
S-7200B
3. INSTALLATION
6
7. Machine head
(1) Hinges [2 pcs]
(2) Machine head
(3) Head rest
NOTE:
Tap the head rest (3) securely into
the table hole. If the head rest (3) is
not pushed in as far as it will go, the
machine head will not be sufficiently
stable when it is tilted back.
8. Operation panel
(Models with operation
panel)
(1) Operation panel
(2) Screws [2 pcs]
(Use for tightening rear cover)
9. Sticker (Remove)
(1) Sticker
10. Cotton stand
(1) Cotton stand
NOTE:
Securely tighten the nut (4) so that
the two rubber cushions (2) and the
washer (3) are securely clamped and
so that the cotton stand (1) does not
move.
2097M
3636M
3633M
3634M