Brother RH-9820 Sewing Machine User Manual


  Open as PDF
of 6
 
*
1
Special specification for Chinese market
*
2
Change of the ranges L1422-L3442 is available by replacing gauge parts. (For details, please consult your place of purchase.)
*
3
For Chinese market: DOx558 - NY2#12-#16 (ORGAN)
*
4
For Chinese market: -00: #16, -01: #14, -02: #18
All the threads are cut short by the
thread trimmers. This saves the
trouble of manual trimming and
reduces consumption of the thread.
RH-9820-
Specifications
-00 -01 -02
L2230 L1826
*
1
Jeans Jeans, trousers
22-30 mm
L1422 (14-22 mm)
*
2
L1826 (18-26 mm)
*
2
L2634 (26-34 mm)
*
2
L3442 (34-42 mm)
*
2
30 mm
24 mm
28 mm
18-26 mm
L1422 (14-22 mm)
*
2
L2230 (22-30 mm)
*
2
L2634 (26-34 mm)
*
2
L3442 (34-42 mm)
*
2
26 mm
20 mm
24 mm
Long thread cut
None
Ladies’ wear
Men’s wear, casual wear,
jeans, trousers
Only the upper thread is cut by the
thread trimmer. Buttonholes up to
50 mm long can be sewn.
Long thread cut
Long thread cut
Men’s wear, casual wear
Ladies’ wear,
jeans, trousers
All the threads are cut long by the
thread trimmers. The long thread
ends can be securely held in the
subsequent process. It is suitable
for cases that require accurate
short end or manual trimming.
Short thread cut
Short thread cut
Eyelet buttonhole : 8-50mm
Straight buttonhole : 5-50mm
Eyelet buttonhole : 8-42mm
Straight buttonhole : 5-42mm
1,000-2,500rpm
0.5-2.0mm
1.5 - 5.0 mm (Up to 4.0 mm in mechanical, up to 5.0 mm with zigzag width compensation)
0-20mm
Foot switch (Treadle type, Two-pedal type), Hand switch (Two-lever type)
Intermittent feed by 3 pulse motors (X, Y,
$
)
DOx558 Nm80 - Nm120 (SCHMETZ)
Japanese, English, Chinese, German, French, Spanish, Italian,
Portuguese, Turkish, Indonesian, Vietnamese and Russian
Emergency stop function and built-in automatic stopping device activated by safety circuit in case of trouble
AC servo motor 550W
Main regulator: 0.5 Mpa, Hammer pressure regulator: 0.4 MPa
43.2 l/min. (8 cycles/min.)
Machine head: Approx. 120 kg.,Operation panel: Approx. 0.6 kg., Control box: 14.2-16.2 kg. (depending on the destination)
Single phase 100V/200V, 3-phase 200V/220V/380V/400V, 400VA
DOx558 Nm100 DOx558 Nm90 DOx558 Nm110
16mm
3mm2.5mm
30mm
22mm
30mm
12 mm as standard (Available up to 16 mm)
Specifications
Thread
trimmer
Main applications
Other applications
Features
Sewing shape
Sewing length
Length of work clamp (Standard)
Length of hammer (Standard)
Length of hammer (Accessory)
Sewing speed
Stitch pitch
Zigzag width
Zigzag width (Factory setting)
Taper bartack length
Height of work clamp
Starting method
Feed mechanism
Needle
*
3
Needle(Factory setting)
*
4
Languages supported
for operation panel
Safety equipment
Upper shaft motor
Air pressure
Air consumption
Weight
Power supply / Power consumption
Upper thread
trimmer
Lower thread
trimmer
Printed in Japan 2007.3. I 6060906 B Vol.2 1
Product specifications are subject to change for improvement without notice. Please read instruction manual before using the machine for safety operation.
15-1,Naeshiro-cho,Mizuho-ku,Nagoya 467-8561, Japan.
Phone
:81-52-824-2177
Fax
:81-52-811-7789
http://www.brother.com/
To preserve environment, this catalog is produced using the ECF paper (Elemental Chlorine-Free) and SOY INK.
CHINA
HONG KONG
ASIA
MIDDLE EAST
EUROPE
AMERICA
TURKEY
BROTHER (CHINA) LTD.
http://www.brothergroup.com.cn/cn/area_top.html
BROTHER INTERNATIONAL (HK) LTD.
http://www.brother.com.hk/
BROTHER INTERNATIONAL SINGAPORE PTE LTD.
http://www.brother.com.sg/
BROTHER INTERNATIONAL (GULF) FZE
http://www.brother.ae/
BROTHER INTERNATIONALE INDUSTRIEMASCHINEN G. m. b. H.
http://www.brother-ism.de
BROTHER INTERNATIONAL CORPORATION
http://www.brother-usa.com/
BROTHER INTERNATIONAL CORPORATION TURKISH LIAISON OFFICE
+86-021-6237-1228
+852-3589-9040
+65-538-0311
+971-4-8835878
+49-2822-6090
+1-908-704-1700
+90-212-495-3971
 previous