Filter
Top Products
146
EMBROIDERY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Embroidery step by step
The basic steps for embroidery are as follows.
↓
↓
↓
↓
↓
↓
↓
↓
↓
1 Presser foot attachment
Attach the embroidery foot “Q”.
For details on attaching the embroidery foot, refer to “Attaching the
embroidery foot” (page 147).
2 Checking the needle
Use a needle matched to the fabric.
For details on replacing the needle, refer to “Replacing the needle” (page
42).
3
Embroidery unit
attachment
Attach the embroidery unit.
For details on attaching the embroidery unit, refer to “Attaching the
embroidery unit” (page 150).
4 Replacing the bobbin case
When using other kinds of embroidery bobbin thread, use the optional
alternate bobbin case (no color on the screw).
For details on replacing the bobbin case, refer to “Cleaning the race”
(page 184).
5 Bobbin thread setup
For the bobbin thread, wind embroidery bobbin thread and set it in
place.
For details on setting up the bobbin thread, refer to “Winding/Installing
the Bobbin” (page 25).
6 Fabric preparation
Attach a stabilizer material to the fabric, and hoop it in an embroidery
frame.
For details on preparing the fabric, refer to “Preparing the Fabric” (page
153).
7
Embroidery frame
attachment
Attach the embroidery frame to the embroidery unit.
For details on attaching the embroidery frame, refer to “Attaching the
Embroidery Frame” (page 157).
8 Pattern selection
Select an embroidery pattern.
For details on selecting embroidery patterns, refer to “Selecting
Embroidery Patterns” (page 159).
9 Checking the layout
Check and adjust the size and position of the embroidery.
For details on adjusting the layout, refer to “Adjusting the layout” (page
171).
10 Embroidery thread setup
Set up embroidery thread according to the pattern.
For details on setting up the thread, refer to “Upper Threading” (page
31).