Filter
Top Products
R
15-1,Naeshiro-cho,Mizuho-ku,Nagoya 467-8561, Japan.
Phone
:81-52-824-2177
Fax
:81-52-811-7789
http://www.brother.com/
Product specifications are subject to change for improvement without notice. Please read instruction manual before using the machine for safety operation.
Printed in Japan 2003.4. I3040834B Vol.1
To preserve environment, this catalog is produced using the ECF paper (Elemental Chlorine-Free) and SOY INK.
Specifications
KE-484C-X
R- intermittent feed mechanism (pulse-motor driven mechanism)
DP X 17 #25
Variable
20,000 stitches
(
including 10,000 stitches which can be added
)
Pneumatic type
25 mm max.
Standard equipment
P-ROM
(
Any sewing pattern can be added using PS-3000.
)
16
4
Up to 100 patterns can be added. Total number of stitches of stored data which can be added is within 10,000.
20 - 200
Three-phase 400 W induction motor
122.6 kgf
(
100V, 110V
)
, 117.6 kgf
(
240V, 380V, 400V
)
, 112.6 kgf
(
220V, 230V
)
Machine head: 56 kgf,
Operation panel: 0.6 kgf,
Control box: 19 kgf
(
100V, 110V
)
14 kgf
(
240V, 380V, 400V
)
, 9 kgf
(
220V, 230V
)
Single-phase 100V, 110V, 220-230V, 240V,
3-phase 200V, 220V, 380V, 400V
Max. electric power consumption 600VA
Intermediate stop function
Feed mechanism
Needle
No. of stitches
Max. stitch number
Work clamp lifter
Work clamp height
Thread take-up device
Data storage method
No. of user programs
No. of cycle programs
No. of stored data
Enlarging and reducing patterns
Motor
Weights
Power source
Safety deviice
Triple hookLock stitch
Heavy materials
Extra heavy
materials
Thread trimmer
Max. sewing
speed
Air consumption
Model
KE-484C
100ן60mm 0.1
-
10.0mm
2,200 rpm
Thread wiper
Sewing area
Stitch length
*
When stitch length is 3mm or less.
At the time of shipment, the P-ROM will be blank and the presser foot and feed plate will be unmodified.
(The presser foot, needle plate and PROM specifications can be specified in detail to suit your
requirements when ordering.)
0.5MPa
26 /min