Filter
Top Products
5. USING THE OPERATION PANEL (BASIC OPERATIONS)
36
KE-430F, BE-438F
5-2. Program setting method
Patterns, X-scale, Y-scale, sewing speed, slow start pattern and upper thread tension can be recorded into programs.
When a program number is selected, the program which has been set for that number can then be sewn.
Program numbers 1 to 89 (1 to 64 for the 438F) have patterns preprogrammed into the program numbers with the same numbers
as the pattern numbers, and these pattern numbers cannot be changed. All items in program numbers 200 to 999 can be set as
desired by the user.
1
Switch to program mode.
TEST indicator flashes, PTRN No. indicator illuminates
While pressing the TEST key, press the SELECT key.
The program number will be displayed in the
PROGRAM No. display, and “Ptno” will be displayed in
the menu display.
If a pattern has been recorded in a program, the number
for that pattern will be displayed in the TENSION
display, and if no pattern has been recorded, “—“ will be
displayed.
Select the program number that you would like to
change the parameters for.
Press the
or key to set the program number that you
would like to record.
Program numbers 1 to 89 (1 to 64 for the 438F) have
the following restrictions. If you would like to create your
own programs using sewing patterns, use program
numbers 200 to 999.
2
Restrictions due to program numbers selected
Program No. 1 to 89 (430F), 1 to 64 (438F) 200 to 999
Pattern selection
operation
Not possible Can be recorded as desired
Patterns that can be
recorded
Patterns with same number as program
number already recorded
All patterns recorded in the sewing
machine
3
(If program number 200 to 999 is selected)
Record a pattern.
Press the
or key to change the pattern number,
and then press the ENTER key to apply the change.
The setting ranges for other items will vary in
accordance with the pattern which is recorded, so
record the pattern first.
If “---“ is recorded as the pattern number, that particular
program will no longer have anything recorded.
If the display is flashing, it means that no pattern number
has been entered and applied. If you press the SELECT
key or the TEST key, the changes to the program
contents will be canceled.
2398B
For example, program
number 200
2399B
2400B
2396B 2397B