![](http://pdfasset.owneriq.net/f/5c/f5c04802-6cd8-411d-8a5c-d9deebf1c342/f5c04802-6cd8-411d-8a5c-d9deebf1c342-bge.png)
Operations on the machine panel
1. The “Ready” light should be on if the design was sent to the machine.
2. If “HOOP” is displayed on the machine panel, press .
(Note: This will move the pantograph to match the position of the design in the hoop from the computer.)
3. To trace the design in the hoop, press
(Note: This step is to reconfirm that the design does fit in the hoop attached to the machine.)
4. Press the button to start the machine.