Filter
Top Products
Single-head cylinder arm machine
9/12 needles
Automatic color change
Quick-change 270º cap system
Jumbo bobbin
Cam-driven, single presser foot for fast,
quiet operation
Noise reduction feed mechanism
Automatic lubrication system
Automatic top and bottom thread trimmers
Maximum sewing speed of 1,200 spm
Adjustable tubular frame holder
Narrow machine design: machine will fit
through a 32'' door opening (with table
assemblies removed)
Trace mode for verifying location of designs
before sewing
Built-in 3.5'' floppy disk drive enables the
machine to run as an independent stand-alone
unit and able to read all popular embroidery
machine formats
Machine memory of 45 designs (a total of
480,000 stitches)
Back up or move forward through the design
in increments of 1, 10, or 100 stitches or by
color changes
Capable of sewing flat, tubular, and finished
cap items
Memory retention after machine shut-off
World-class engineers and designers staff Brother’s state-of-the-art
Research & Development Center in Japan where they are constantly
designing and refining embroidery technologies to solve embroidery
manufacturing challenges.
Since designing our first industrial sewing machine in 1928, Brother has enjoyed a reputation for
innovation. We incorporated years of industrial sewing machine knowledge and engineering expertise
into our line of computerized embroidery equipment. Case in point: the exclusive automatic oiling
system found on our single head models revolutionized the industrial sewing machine market when
Brother introduced it more than 70 years ago. And, the jumbo bobbin technology, another Brother
first, which has performed to the highest standards of excellence for more than 40 years is found on
all Brother computerized embroidery equipment.