Brother 431B Sewing Machine User Manual


 
3. DISASSEMBLY
-14. Work clamp lifter mechanism (Solenoid specifications)
KE-430B, 431B, 433B, 434B
KE-430C, 431C, 434C
1. Springs [2 pcs]
KE-430B, 430C series
41
2.
Screws [2 pcs]
3. Guide
4. Snap pins [2 pcs]
5. Rubber cap
6. Link shaft, D [Pull out]
7. Set screws [2 pcs: Loosen]
8. Snap pins [2 pcs]
9. Link shaft, A [Pull out]
10. Washers [2 pcs]
Be careful not to drop.
3305Q
3306Q
11. Oi
l cap
12. Snap pin
13. Link shaft, C [Pull out]
14. Work clamp plate
15. Work clamp lifter link-related parts
16. Rubber caps [2 pcs]
17. Screws [2 pcs]
18. Screws [4 pcs]
19. Presser solenoid assy
[Disconnect the harness]
3307
Q
Note:
<KE-433B, 434B, 434C>
Hold the work clamp plate
when removing link shaft
C, otherwise the work
clamp plate may fall
down.
Do not remove,
otherwise the work
clamp will not move
smoothly.