Brother 285 Sewing Machine User Manual


 
GETTING READY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
16
d
Be sure that no objects or hands are near the
embroidery unit and press .
When an animation is displayed on the
screen, the message above will be displayed
if you touch the screen with your finger.
X The carriage moves to its initial position.
a Carriage
CAUTION
Note
z If the machine is initialized with hands or
objects near the carriage, the screen may
return to the initial display. After removing
whatever is near the carriage, turn the power
on again.
X The screen for selecting the embroidery
pattern type is displayed.
For details on the embroidery patterns, refer
to “Selecting Embroidery Patterns” (page 49).
Removing the embroidery unit
Make sure that the machine is completely stopped
and follow the instructions below.
a
Remove the embroidery frame.
For details on removing the embroidery
frame, refer to “Removing the embroidery
frame” (page 48).
b
Press , and then press .
X The embroidery carriage moves into a
position where it can be stored.
c
Turn off the machine.
For details, refer to “Turning off the machine”
(page 19).
CAUTION
Do not put your hands or other objects
near the carriage. It may cause injury.
a
Always turn off the machine before
removing the embroidery unit.
It may cause malfunctions if removed
when the machine is turned on.