Broan QTXE150FLT Fan User Manual


 
Page 4
MODELS QTXE080FLT • QTXE110FLT • QTXE150FLT
SERVICE PARTS
99044459A
Key No. Part No. Description
1 97016466 Housing
2 97016450 Duct Connector-6”
3 98010102 Wiring Plate
4 99170245 Screw, #8-18 X .375
5 97018011 Wire Panel/Harness Assembly
6 97017850 Blower Assembly (QTXE080FLT)
97017851 Blower Assembly (QTXE110FLT)
97016591 Blower Assembly (QTXE150FLT)
7 97018271 Grille Assembly (includes key nos. 8, 9 & 10)
8 99140199 Grille Spring (2 req’d)
9 99111399 Lens
10 99271381 Bulb, GU24, 18W Fluorescent (2 req’d)
11 99420665 Thumbscrew, #8-18 x .375
12 97018014 Spacer (2 supplied)
13 QTHB1 Hanger Bar Kit
Order service parts by “Part No.” - not by “Key No.”
INSTALL GRILLE
5. Finish ceiling.
Install ceiling material. Cut out around housing.
6. Attach grille
to housing.
Squeeze grille
springs and insert
them into tabs on
each side of hous-
ing.
SERVICE NOTE To remove Blower
Assembly: Unplug motor. Remove
thumbscrew (11) from motor plate
flange. Find the single TAB on the
motor plate (located next to the
receptacle). Push up near motor
plate tab while pushing out on side
of housing. Or insert a straight-blade
screwdriver into slot in housing (next
to tab) and twist screwdriver.
Replacement parts
can be ordered on our
website. Please visit
us at www.broan.com
8. Remove
light lens.
Carefully insert a
small flat-blade
screwdriver
between grille and
lens. Pry lens out.
7. Push grille
against
ceiling.
9. Install light
bulbs.
Fluorescent bulbs
supplied.
Purchase a 4W
incandescent night
light bulb.
Insert bulbs into
their sockets.
Replace lens.