Filter
Top Products
brkelectronics.com
ARCHITECTURAL AND ENGINEERING SPEC
INSTALLATION OF ALARM
The carbon monoxide alarm shall be a BRK Model CO614 and shall provide at a
minimum the following features and functions:
1. An electrochemical CO sensor and an LCD multifunction digital display with peak
CO level memory capability.
2. Powered by 120V AC, 60Hz and have a monitored 9V battery backup and a solid
state piezo horn rated at 85dB at 10 ft. and shall be capable of self restoring.
3. The unit shall perform self diagnostic tests and issue a malfunction warning both
audibly (three chirps) and visually (“Err” in display) if the unit malfunctions.
4. A visual LED power-on indicator to confirm unit is receiving power or to confirm
unit has switched to battery backup mode. In battery backup mode, digital
display indicates “bAt”; “bAt” indication will flash if battery is weak or missing.
5. The CO sensor is adjusted not to detect CO levels below 30 PPM and will not
alarm when exposed to constant levels of 30 PPM for 30 days. It will alarm
at the following levels: 400 PPM CO between 4 and 15 minutes, 150 PPM CO
between 10 and 50 minutes and 70 PPM CO between 60 and 240 minutes.
6. A test/silence button to check all alarm functions and to silence any nuisance
alarms. In addition, the unit shall have a low battery silence feature to quiet the
low battery chirp for up to eight hours.
7. The unit shall be capable of operating between 40°F (4°C) and 100°F (38°C) and
relative humidity between 10% and 95%.
8. The unit shall at a minimum meet the requirements of UL2034, NFPA 720 and ICC.
SHIPPING SPECS:
TECHNICAL SPECS
Individual Carton Dimensions 6.81"L x 3.99"W x 2.38"H
Weight 0.61 lbs.
Cube 0.037 ft3
UPC 0 29054 00382 9
Master Carton Dimensions 7.69"L x 7.31"W x 7.38"H
Master Pack 6
Weight 4.0 lbs.
Cube: 0.24 ft3
I2 of 5: 600 29054 00382 1
Pallet Information
Cases per Layer 30
Number of Layers: 6
Cases per Pallet: 180
Units per pallet: 1,080
Cube: 49.3 ft3
Weight: 785 lbs.
Alarm Dimensions: 5.9” H x 3.6” L x 1.5" D
Weight: 6.5 oz
Operating Voltage: 120V AC 60Hz w/ 9V battery backup
Operating Current: .09 amps (standby/alarm)
Temperature Range: 40°F (4°C) to 100°F (38°C)
Humidity Range: 10% to 95% relative humidity (RH)
Audio Alarm: 85dB at 10 feet
Test/Silence: Electronically simulates carbon
monoxide condition, causing the unit to alarm
Press and hold test/silence button
Alarm Reset: Automatic when CO clears
Interconnections: Up to 18 units of First Alert or BRK Smoke, CO and
Heat Alarms. Maximum of 12 smoke alarms. See
user’s manual for details.
CO Sensor: Electrochemical
Indicator Lights/Sounds:
AC Power: Constant Red LED, Display: blank
DC Power: Intermittent Red LED, Display: "bAt"
Local Alarm: Red LED flashes rapidly, Display: CO level in PPM
Listing: Listed to UL2034 Standard
©2009 BRK Brands, Inc. a Jarden Corporation
Company (NYSE: JAH)
3901 Liberty Street Road
Aurora, IL 60504-8122
All rights reserved
First Alert is a registered trademark of the First Alert Trust
BRK is a registered trademark of BRK Brands, Inc.
CM2930
TOP/END VIEW SIDE VIEW
CAT.
CO614B
THE PARTS OF THIS CO ALARM
1. Test/Silence/Scroll Button
2. POWER/ALARM Light
3. Digital Display
4. Air Vents
5. Alarm Horn (under cover)
MOUNTING
BRACKET
Installation of this smoke alarm must conform to all local electrical codes and Article 760
of the National Electrical Code (NFPA 70) and NFPA 720.
CO
5.9"
3.6"
1.5"
1.5"
2.2"
1
2
3
4
5