Filter
Top Products
Light Duty Commercial Power Direct Vent
Energy Saver Gas Water Heater
The LD Power Direct Vent FVIR Defender Safety System
®
Models Feature:
■ C
losed Combustion Venting System—
P
ower Direct Vent closed
combustion system utilizes external air for combustion and exhausts directly
to the outside through a separate two-pipe system. The air intake and exhaust
vent are 3" connections. The equivalent feet of intake venting cannot be
greater than the equivalent feet of exhaust venting.
■ Flammable Vapor Sensor—Electronic sensor prevents water heater
operation if flammable vapors are detected.
■ Factory Installed Hydrojet
®
Total Performance System—Cold water inlet
sediment reducing device helps prevent sediment build up in tank. Increases
first hour delivery of hot water while minimizing temperature build up in tank.
■ Vitraglas
®
Lining—Bradford White water heater tanks are protected from the
corrosive effects of hot water by an exclusive ceramic porcelain-like coating.
■ Electronic Gas Control—The integrated, immersion gas control offers more
precise temperature control for higher first hour delivery and also allows water
temperature adjustment without removing the cover. The control is equipped
with an LED display to aid in start-up and diagnostics.
■ More Precise Temperature Control—With an adjustable temperature up to
180ºF. (Not recommended for 180ºF sanitization.)
■ Spark to Pilot Ignition System—Eliminates the constant burning pilot used
on other water heaters.
■ Powerful Blower Motor—Our design has higher torque for greater resistance
to outside winds and the power to eliminate problems with difficult venting
situations. This significantly quieter motor runs cooler for a considerably
longer operational life.
■ Optional Concentric Vent Kit Termination—3" termination fitting provides
for only one exit opening through a wall or roof. (Subtract 10ft. for intake pipe
and 10ft. for exhaust pipe when calculating total vent length.)
■ Horizontal and Vertical Venting—With 3" or 4" PVC, ABS, or CPVC
(Maximum equivalent vent length for each pipe on reverse side).
■ Side Connections—3/4" NPT tappings allow easy connections for space
heating applications (Potable water only).
■ 2" Non-CFC Foam Insulation—Surrounds the tank surface, saving energy
by retarding loss of heat (PDX-65S has 1" Non-CFC Insulation).
■ Water Connections— 3⁄4" NPT factory installed true dielectric fittings extend
water heater life and eases installation.
■ Factor
y Installed Heat T
raps—
Design incorporates a flexible disk that
reduces heat loss in piping and eliminates the potential for noise generation.
■ Protective Magnesium Anode Rod—Provides added protection against
corrosion for long trouble-free service.
■ Stainless Steel Flue Baffle—Maximizes the amount of heat absorbed by the
tank and r
educes heat loss during standby periods.
■ Steel Tank—Heavy gauge steel automatically formed, rolled and welded.
■ T&P Relief Valve—Included.
■ Brass Drain V
alve
.
■ Design Certified by CSA International (formerly AGA and CGA).
3 or 5-Y
ear Limited Tank Warranties / 1-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete
copy of the war
ranty included with the heater
.
Photo is of
PDX-65S-65FB-3N
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 7,063,133 B2; 5,954,492; 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185;
5,485,879; 5,277,171; (B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968;
4,672,919; Re. 34,534. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105.
Defender Safety System
®
, Vitraglas
®
and Hydrojet
®
are registered trademarks of Bradford White
®
Corporation.
755-B-0807-A
Bradford White received the highest numerical score among water heater/boiler manufacturers in the proprietary J.D. Power and Associates/ McGraw-Hill Construction 2006 HVAC and Water Heater/Boiler Subcontractor Satisfaction Study
SM
.
Study based on 882 r
esponses measuring 3 water heater/boiler manufactur
ers and measur
es opinions of subcontractors. Pr
oprietar
ystudy r
esults are based on experiences and perceptions of subcontractors surveyed in May through July 2006. Your
experiences may vary. Visit jdpower.com
"Highest in Subcontractor Satisfaction among Water Heater/Boiler Manufacturers"